shengstone international limited
Professional Laboratory Worktop And Sink Supplier
Add to Cart
2018-3-8
Special Custom Chemical Research Institute Octagon Work Stations-Epoxy Resin Worktop
Advantage
1 24 hours super corrosion resistance
Inert materials have strong resistance to most corrosive chemicals.
Resistance to high temperature
2 Pollution resistance
Surface is smooth, no stoma, not to hide the dirt, effectively restrain bacterial growth, such as the SARS virus, etc.,especially suitable for the medicine and biological laboratories.
3. Beautiful appearance
Smooth surface (MATT finish) , light reflection, easy to clean, easy maintenance.
4. Uniform color
Ensure the color of different batches of products is permanent, can be used for multi color selection.
Octagonal marine edge work surface have been designed to accommodate more users.The standard thickness is 25 mm
Tailored for educational and training uses,the innovative design enables larger groups of students or technicians to gather around a single device or demonstration on the work surface.
The octagnal work surface is available as solid surface,or (as shown) with an epoxy resin trough.
2. Common specification sheet (Unit : mm)
| Long | Wide | Thickness |
| 1200 | 700(750) | 16/19/25 |
| 1500 | 700(750) | 16/19/25 |
| 1800 | 700(750) | 16/19/25 |
| 2400 | 700(750) | 16/19/25 |
Feature
1) And laboratory common high temperature 600 degrees, not foaming, not broken, especially suitable for a long time to place the combustion furnace ventilation cabinet.
2). Absolute moisture
The epoxy resin worktop with low water absorbition, does not absorb moisture in the air, the installation will not warp deformation, especially suitable for the operation of splash zone.
3). Safe and reliable
Do not contain asbestos ingredient, nonflammable, non-conductive, do not produce poisonous gas when heated, will not violate the safety and health of operator.
4). Durable
One core, not to take off layer, not inflation, not cracked,surface scratches can be repaired after renovation
5). High performance to price ratio
Unique 19mm thickness, the market is the highest price of the laboratory table system.
4. Minimum acceptable results
Minimum acceptable test results shall be equal to or better than the following reagent rating:
| CHEMICALS | MINIMUM |
| ACCEPTABLE | |
| RESULTS | |
| Inorganic Acids-Corrosive | |
| Chromic Acid 40% | 4 |
| Hydrochloric Acid 10% | 1 |
| Hydrochloric Acid 37% | 1 |
| Nitric Acid 40% | 1 |
| Nitric Acid 70% | 1 |
| Sulfuric Acid 60% | 1 |
| Sulfuric Acid 96% | 5 |
| Organic Acids-Corrosive | |
| Acetic Acid 5% | 1 |
| Acetic Acid,Glacial | 1 |
| Citric Acid 1% | 1 |
| Oleic Acid | 1 |
| Phenol Solution 5% | 1 |
